ANGLE IRON

Angle Iron is a piece of iron that forms a right angle and is used to span openings and support masonry at the openings. In brick veneer, they are also used to secure the veneer to the foundation.

Concrete mix is perfect for pouring concrete pads 2” (50 mm) thick or more, and building or repairing anything made out of concrete. Being a properly blended mixture of portland cement, sand, and gravel, all the user has to do is add water.

At Brown’s, we carry the 66 lb (29.87 kg) bags of Concrete Mix.

Sand (topping) mix is used for applications where a concrete pad is less than 2” (50 mm) thick. Sand mix consists of portland cement and graded sand.

Sand mix can also be used for patching and topping chipped concrete surfaces, or in conjunction with an acrylic fortifier for repairs less than 1” (25 mm) thick. Sand mix can also be used for laying flagstone.

At Brown’s, we carry the 66 lb (29.87 kg) bags of Sand Mix.

Mortar mix is used for laying brick, block or stone. Being a premixed blend of masonry type cement and graded sand, all the user needs to do is add water.

Mortar mix is also used for repointing existing brick, block or stone walls. It is a long lasting, strong bonding mortar.

At Brown’s, we carry the 66 lb (29.87 kg) bags of Mortar Mix.

Type N Mortar Cement – Medium strength mortar for general use such as in exposed non load-bearing masonry walls above grade and in tuck-pointing.

Type S Mortar Cement - Recommended where a higher compressive strength mortar is required, such as for parging, foundation walls and walls designed with reinforcement.

MORTAR COLOUR

Mortar can be nearly 20% of the total surface area of a wall, therefore a change in mortar colour will effect the overall tone of the wall.

SGS Mortar Colors are provided in unique pre-weighed and measured amounts to assure the most accurate color consistency available. Our A, H, and X series offer over 50 standard colors, all pre-measured for use in mortar and other mixes.

Click on the adjacent image to download a digital copy of the SGS Mortar Color Guide.

Our Walco Sills are 6” deep, either 2 3/8” or 3 1/2“ inches thick, and cut to the desired length(s). Drips are provided on the base of the sills to stop water from returning to the wall

Colours  Natural

Cottage pads are fundamentally double thickness patio slabs designed to help support heavy loads like elevated cottages.

Deckfoot's unique design makes it an ideal choice for deck installation on various sites. Whether you are building a ground level, an elevated deck, or a leveled deck on a stepped gradient, Deckfoot makes it a snap.

Available for 4” and 6” square posts.

Anchor Bolts are used to fasten columns, girders or other members to concrete or masonry.

Brown’s Concrete carries an 8" by ½” anchor bolt. Each bolt comes with a nut and flat washer.

Brown’s carries the full line of Blok-Lok® wire reinforcing (mill galvanized, 9 gauge), including ladder and truss formats for 4” through 12” blocks.

Reinforcing is sold in bundles of 250 feet.

MORE INFORMATION

Brick Ties are used to: connect multiple wythes of masonry, often of different materials; anchor masonry veneer to backing systems other than masonry; and, connect composite masonry walls.

Brown’s Concrete carries a 22 gauge tie which is 7” long by 1” wide.